Maxim-integrated DS4830 Optical Microcontroller Manual de usuario descargar pdf (Pagina 22)

DS4830 User’s Guide

2.6.4 – Internal System Resets

There are two possible sources of internal system resets. An internal reset will hold the DS4830 in reset mode for 12

clock cycles.

1. When data BBh is written to the special I

C slave address 34h.

2. When in-system programming is complete and the ROD bit is set to 1.

2.7 – Clock Generation

The DS4830 generates its 20MHz peripheral clock using an internal oscillator and generates 10MHz instruction clock by

divide 2.This oscillator will startup when V

exceeds the brownout voltage level, V

. There is a delay of approximately

1msec between when the oscillator starts and when clocking of the DS4830 begins. This delay ensures that the clock is

stable prior to beginning normal operation.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 226 227

Sin comentarios

Maxim-integrated DS4830 Optical Microcontroller Manual de usuario Pagina 22