Maxim-integrated MAXQ Family Users Guide: MAXQ2010 Supplement Manual de usuario descargar pdf (Pagina 87)

MAXQ Family User’s Guide:

MAXQ2010 Supplement

19-5

19.2.2 ADC Conversion Sequence Address Register (ADADDR, M4[07h])

Bits 15:12, 7, 3: Reserved

Bits 11:8: ADC Sequence Sample Storage Address (SEQSTORE[3:0]). These bits contain the index of the first

ADBUF register (inclusive) that is used to store samples from the ADC conversion sequence.

Bits 6:4: ADC Sequence Start Address (SEQSTART[2:0]). These bits contain the index of the first ADCFG register

(inclusive) that is used to define the ADC conversion sequence.

Bits 2:0: ADC Sequence End Address (SEQEND[2:0]). These bits contain the index of the last ADCFG register (inclu-

sive) that is used to define the ADC conversion sequence.

19.2.3 ADC Control Register (ADCN, M4[0Eh])

Bits 15:12: Reserved

Bits 11:10: ADC Data Available Interrupt Interval (ADINT[1:0]). These bits select the condition for generating an

ADC data available interrupt (setting ADDAI to 1).

*Can only be written when ADCONV = 0.

Bit #

15 14 13 12 11 10 9 8

Name — — — — SEQSTORE[3:0]

Reset 0 0 0 0 0 0 0 0

Access r r r r rw* rw* rw* rw*

Bit #

7 6 5 4 3 2 1 0

Name — SEQSTART[2:0] — SEQEND[2:0]

Reset 0 0 0 0 0 0 0 0

Access r rw* rw* rw* r rw* rw* rw*

Bit #

15 14 13 12 11 10 9 8

Name — — — — ADINT1 ADINT0 ADCLK1 ADCLK0

Reset 0 0 0 0 0 0 0 0

Access r r r r rw* rw* rw* rw*

Bit #

7 6 5 4 3 2 1 0

Name IREFEN ADCONT ADDAIE ADPMO ADACQ[3:0]

Reset 0 0 0 0 0 0 0 0

Access rw* rw* rw* rw* rw* rw* rw* rw*

ADINT1 ADINT0 SET ADDAI to 1 . . .

0 0 After each ADC conversion (every sample)

0 1 After the conversion sequence has completed (works for single-conversion mode only)

1 0 Every 12 ADC samples

1 1 Every 16 ADC samples

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 146 147

Sin comentarios

Maxim-integrated MAXQ Family Users Guide: MAXQ2010 Supplement Manual de usuario Pagina 87