Maxim-integrated MAX78630+PPM Evaluation Kit Manual de usuario descargar pdf (Pagina 17)

MAX78630+PPM Evaluation Kit User Manual

Rev 0 17

4 Graphical User Interface (GUI)

A graphical user interface (GUI) is included on the MAX78630+PPM EV kit CD to facilitate quick evaluation of

the MAX78630+PPM energy measurement device. The GUI requires Microsoft.NET Framework 4 on the PC

for which the GUI is to execute on. Upon invoking the GUI executable file, an installation wizard may appear if

Microsoft.NET Framework 4 is not installed on the PC. Follow the installation wizard instructions, or download

Microsoft.NET Framework 4 from the Microsoft web site prior to launching the GUI.

4.1 GUI Initialization

The GUI is self-explanatory when used with the MAX78630+PPM Data Sheet. The user, however, should note

the following about the EV kit hardware:

• Serial COM Port:

 Following the installation instructions in Section 2, launch the GUI executable. Click the

Connection pull-down menu and select Connect.

 The COM Port / Baud Rate box appears. Select the COM port assigned to the EV kit and

leave the baud rate set to 38400 (default). Click the Connect button.

4.1.1 SSI ID Tab

• SSI ID:

 Click the SSI tab. Use the SSI ID number set by DIP switch 5 (1 and 2 are closed by default)

and click Set Target. Upon successful communication with the EV kit, a message appears in

the message box.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Sin comentarios

Maxim-integrated MAX78630+PPM Evaluation Kit Manual de usuario Pagina 17