Maxim-integrated MAX15301 PMBus Command Set Manual de usuario descargar pdf (Pagina 9)

MAX15301 PMBus Command Set User’s Guide

Rev 1 Page 9 of 53

VIN_OFF

Reference:

Standard Command

Lockable:

Yes

Command Code:

0x36

Format:

Linear

Data Bytes:

Units:

Transfer:

Read/Write Word

Factory Value:

0xCAC0 (5.5V)

Description/Notes:

See Section 14.6 of the PMBus Specification Part II.

The MAX15301 hardware has 8-bit resolution for the minimum input voltage required for regulation,

to a maximum value of ≈14.75V.

The desired value of VIN_OFF is retained in memory, regardless limitations imposed by the 8-bit fault

limit resolution, but the read-back value is based on actual hardware register settings.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 52 53

MAX15301 PMBus Command Set 1
User’s Guide 1
Introduction 2
Part Number Differences 2
Table of Contents 3
Rev 1 Page 6 of 53 6
OPERATION 7
ON_OFF_CONFIG 7
VIN_OFF 9
VOUT_MODE 10
VOUT_COMMAND 10
VOUT_TRIM 10
VOUT_CAL_OFFSET 11
VOUT_MAX 11
VOUT_MARGIN_HIGH 11
VOUT_MARGIN_LOW 12
VOUT_TRANSITION_RATE 13
VOUT_DROOP 13
FREQUENCY_SWITCH 15
INTERLEAVE 15
POWER_GOOD_ON 16
POWER_GOOD_OFF 17
TON_DELAY 17
TON_RISE 18
TOFF_DELAY 18
TOFF_FALL 19
Fault Related Commands 20
VOUT_OV_FAULT_RESPONSE 21
VOUT_UV_FAULT_LIMIT 21
VOUT_UV_FAULT_RESPONSE 22
IOUT_OC_FAULT_LIMIT 22
IOUT_OC_FAULT_RESPONSE 23
OT_FAULT_LIMIT 23
OT_FAULT_RESPONSE 24
OT_WARN_LIMIT 25
VIN_OV_FAULT_LIMIT 25
VIN_OV_FAULT_RESPONSE 25
VIN_UV_FAULT_LIMIT 26
VIN_UV_FAULT_RESPONSE 26
Unit Status Commands 28
STATUS_INPUT 29
STATUS_TEMPERATURE 29
STATUS_CML 29
Telemetry Commands 30
READ_TEMPERATURE_1 31
READ_TEMPERATURE_2 31
READ_DUTY_CYCLE 31
READ_FREQUENCY 32
PMB_VALUES 32
Calibration Commands 34
EXT_TEMP_CAL (MAX15301AA01) 35
EXT_TEMP_CAL (MAX15301AA02) 35
CAPABILITY 36
PMBUS_REVISION 36
MFR_MODEL 37
MFR_REVISION 37
MFR_LOCATION 37
MFR_DATE 37
MFR_SERIAL 38
IC_DEVICE_ID (MAX15301AA01) 38
IC_DEVICE_ID (MAX15301AA02) 38
IC_DEVICE_REV 38
Security Commands 39
MANUF_LOCK 40
MANUF_PASSWD 40
USER_CONF 40
USER_LOCK 41
USER_PASSWD 41
SECURITY_LEVEL 42
Memory and Storage Commands 43
STORE_DEFAULT_ALL 44
RESTORE_DEFAULT_ALL 44
STORE_USER_ALL 44
RESTORE_USER_ALL 46
RESTORE_MAXIM_ALL 46
STRAP_DISABLE 47
Control Loop Commands 48
FEEDBACK_EFFORT 49
LOOP_CONFIG 49
COMP_MODEL 50
DEADTIME_GCTRL 50
Trademarks 53
Revision History 53

Comentarios a estos manuales

Sin comentarios

Maxim-integrated MAX15301 PMBus Command Set Manual de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Maxim-integrated MAX15301 PMBus Command Set