Maxim-integrated 78M6613 PSU Firmware Manual de usuario Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 19
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
78M6613 PSU Firmware Quick Start Guide UG_6612_113
16 Rev.0
5. To program the device’s flash using the flash image that was just programmed in the TFP2’s
EEPROM in steps 3 and 4 above, type the P” command at the > prompt or simply push the Program
button on the TFP2. If the programming is successful, a “PASS” message will be displayed. The
Firmware programming is now complete.
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19

Comentarios a estos manuales

Sin comentarios