Maxim-integrated 78M6610+PSU Hardware Design Guidelines Manual de usuario descargar pdf (Pagina 17)

AN_6610_107 78M6610+PSU Hardware Design Guidelines

Rev. 0 17

5.4 Shunt Current Sensor

The current shunt network can also be split between the 78M6610+PSU (daughter) board and the host

board. The 750 Ω termination resistors and anti-aliasing capacitors should be placed near the

78M6610+PSU’s analog input pins.

Figure 13: AIP and AIN Filter Network

The resistive current shunt can be placed remotely on the host board. It is important to provide a wide,

heavy copper path between the current shunt and its connections to high current AC wiring.

Figure 14: Current Shunt Sensor

Current

Shunt

78M6610+PSU

Termination

Resistors

Anti-Aliasing

Capacitors

1 2 ... 12 13 14 15 16 17 18 19

Sin comentarios

Maxim-integrated 78M6610+PSU Hardware Design Guidelines Manual de usuario Pagina 17