Maxim-integrated 73S1215F Evaluation Board Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Hardware Maxim-integrated 73S1215F Evaluation Board. Maxim Integrated 73S1215F Evaluation Board User Manual [en] Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 2
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
73S1215F
Evaluation Board
Simplifying System Integration
QUICK START GUIDE
QS_1215F_007 August 2009
Rev. 1.1 © 2009 Teridian Semiconductor Corporation 1
Introduction
The 73S1215F Evaluation Board platform is a self-contained smart card reader development kit for the
evaluation and development of stand-alone, serial or USB connected smart card solutions with an LCD,
PINpad, or other peripherals.
The board operates with either a PC or Linux
®
host system with a USB port. When plugged into a system
with the appropriate driver loaded, the 73S1215F Evaluation Board can be used as a smart card reader.
Any host application can operate the smart card reader through the PC/SC commands to communicate
with asynchronous smart cards, following T-0 and T-1 protocols, in compliance with ISO7816-3 and EMV
4.1 standards.
System Requirements
A PC running Microsoft
®
Windows
®
XP or a workstation running Linux with a USB port.
24 megabytes of disk storage for the application and documentation.
Package Contents
A 73S1215F Evaluation Board (labeled 73S1215F/1209F/1200F EVAL BOARD w/USB-CCID FW).
A CD containing the associated drivers, applications and documentation.
A USB cable, A-B, male/male, 2 meters.
A 7-12 VDC power adapter with 2.1 mm plug ID.
Default Setup
The 73S1215F Evaluation Board ships with a default configuration suitable for use as a turnkey
Transparent Smart Card Reader using a CCID USB connection to communicate with a host PC
application. The boards hardware and firmware are both pre-configured to work in this state and the
information in this document assumes this default configuration. Refer to the 73S1215F Evaluation Board
User Guide for details on alternate hardware configurations and uses.
Demonstration Host Application
Included on the CD is a demonstration application named CCID-USB.exe which is located in the
x:\yyy\12xxF Vz.zz\Host Applications\Windows App\Bin\Releasedirectory (where x refers to the drive,
yyy refers to the directory the installation .zip file was expanded to and z.zz is the latest version of the
firmware release). This is a host application that allows:
Smart card activation and deactivation, in ISO or EMV mode.
Smart card APDU commands to be exchanged with the smart card inserted in the board.
Starting a test sequence in order to test and evaluate the board performance against an EMV test
environment.
THIS EVALUATION SYSTEM IS ESD SENSITIVE! ESD PRECAUTIONS SHOULD BE
TAKEN WHEN HANDLING THE BOARD!
Vista de pagina 0
1 2

Indice de contenidos

Pagina 1 - 73S1215F

73S1215F Evaluation Board Simplifying System Integration™ QUICK START GUIDE QS_1215F_007 August 2009 Rev. 1.1 © 2009 Teridian Semiconductor Corpora

Pagina 2

73S1215F Evaluation Board Quick Start Guide QS_1215F_007 2 Rev. 1.1 Software Installation and Use on Windows XP Follow these steps to install the dr

Comentarios a estos manuales

Sin comentarios