Maxim-integrated PowerTool MAXPOWERTOOL002 Manual de usuario descargar pdf

PowerTool MAXPOWERTOOL002# Quick Start Guide

The MAXPOWERTOOL002# is a USB-to-PMBus™ interface dongle for exclusive use with Maxim

Integrated’s digital power products. The dongle can be used to communicate with PMBus devices using

the installed PowerTool software.

1. Download and install the PowerTool software available at:

http://content.maximintegrated.com/en/design/tools/applications/evkit-

software/index.mvp/id/1183

2. Remove the MAXPOWERTOOL002# from the package.

3. Connect the provided USB cable and ribbon cable as shown in Figure 1. The STATUS LED on

the MAXPOWERTOOL002# illuminates. The color of the LED indicates the device’s status as

follows:

• Steady GREEN color: No I

C communication is in progress.

• Blinking ORANGE color: The device is communicating I

C data.

• Steady RED color: I

C communication has been interrupted.

Figure 1. MAXPOWERTOOL002# Installation

Features:

• Supports 100kHz and 400kHz I

C communication speeds

• USB-to-SMBus conversion for Maxim digital power evaluation kits

• Uses USB only for power

For additional information, visit: www.maximintegrated.com

PMBus is a trademark of SMIF, Inc.

Revised 10/14

Pagina 1

PowerTool MAXPOWERTOOL002# Quick Start Guide The MAXPOWERTOOL002# is a USB-to-PMBus™ interface dongle for exclusive use with Maxim Integrated’s digit

Sin comentarios

Maxim-integrated PowerTool MAXPOWERTOOL002 Manual de usuario